A-A-50548
q) Lubrication requirements (see 3.9).
r) When preservation and packing is other than specified (see 6.0).
7.3 Part Identification Number (PIN). The following part identification numbering procedure is for government purposes and does not constitute a requirement for the contractor. The PINs to be used for the items acquired to this description are created as follows:
AA50548 – X
AA50548 = Commercial Item Description Number
X = Type code number (see 3.7.1).
7.3.1 Type code number. The type of fans is identified by a single digit number as follows:
Type I – 1
Type II – 2
Type III – 3
7.4 Source of documents.
7.4.1 AMCA Standards are available from the Air Movement and Control Association (AMCA), 30 West University Drive, Arlington Heights, IL 60004.
7.4.2 ANSI Standards are available from the American National Standards Institute (ANSI), 11 West 42nd Street, New York, NY 10036.
7.4.3 ASTM Standards are available from the American Society For Testing and Materials, 1916 Race Street, Philadelphia, Pa 19103-1187.
7.4.4 NEMA Standards are available from the National Electrical Manufacturers Association (NEMA), 2101 L Street, NW, Suite 300, Washington, DC 20037.
7.4.5 RMA Standards are available from the Rubber Manufacturers Association, 1400 “K” Street, NW, Suite 900, Washington, DC 20005-2403.
7.5 Subject term (key word) listing.
Air handling
Ventilation
MILITARY INTERESTS:
Custodians
Army – ME
Navy – YD1
Review Activities
Army – CE
Navy – MC
CIVIL AGENCY COORDINATING ACTIVITIES:
GSA – FSS
Preparing activity:
Navy – YD1
(Project 4140-0150)
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business