MIL-DTL-151F
Government documents.
2.2
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form
a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are
those cited in the solicitation or contract.
FEDERAL SPECIFICATIONS
TT-P-645
- Primer, Paint, Zinc-Molybdate, Alkyd Type
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-S-901
- Shock Tests H.I. (High-Impact) Shipboard Machinery, Equipment, and Systems,
Requirements for
MIL-DTL-15024
- Plates, Tags, and Bands for Identification of Equipment, General Specification for
MIL-DTL-15090
- Enamel, Equipment, Light Gray, (Navy Formula No. 111)
MIL-S-19622
- Stuffing Tubes, Nylon; and Packing Assemblies; General Specification for
MIL-I-24768/1
- Insulation, Plastic, Laminated, thermosetting, Glass-Cloth, Melamine-Resin (GME)
MIL-I-24768/17
- Insulation, Plastic, Laminated, Thermosetting, Glass-Cloth, Silicone-Resin (GSG)
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-167-1
- Mechanical Vibrations of Shipboard Equipment (Type I - Environmental and Type II -
Internally Excited)
(Copies of these documents are available online at https://assist.daps.dla.mil or from the Standardization Document
Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
2.3 Non-Government publications. The following documents form a part of this specification to the extent specified
herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.
AMERICAN SOCIETY FOR QUALITY (ASQ)
ASQ Z1.4
- Sampling Procedures and Tables for Inspection by Attributes
(Copies of this document are available from www.asq.org or the American Society for Quality, 611 East Wisconsin
Avenue, Milwaukee, WI 53202.)
ASTM INTERNATIONAL
ASTM A342/A342M
- Standard Test Methods for Permeability of Feebly Magnetic Materials
(Copies of this document are available from www.astm.org or ASTM International, 100 Barr Harbor Drive, PO Box
C700, West Conshohocken, PA 19428-2959.)
NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA)
NEMA CB 1
- Brushes for Electrical Machines
(Copies of this document are available from www.nema.org or from the National Electrical Manufacturers Association,
1300 North 17th Street; Suite 1752, Rosslyn, VA 22209.)
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict between
the text of this document and the reference cited herein, the text of this document takes precedence. Nothing in this
document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business