MIL-PRF-18953C(SH)
2.3 Non-Government publications. The following documents form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or
contract.
AIR MOVEMENT AND CONTROL ASSOCIATION (AMCA) INTERNATIONAL, INC.
AMCA 99-0401
Classification for Spark Resistant Construction
AMCA 111
Laboratory Accreditation Program
AMCA 210
Laboratory Methods for Testing Fans for Aerodynamic Performance Rating (DoD
adopted)
AMCA 300
Reverberant Room Method for Sound Testing of Fans (DoD adopted)
(Copies of these documents are available from the Air Movement and Control Association International, Inc.,
30 West University Drive, Arlington Heights, IL 60004 or online at www.amca.org.)
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)/AMERICAN BEARING MANUFACTURERS
ASSOCIATION (ABMA)
ANSI/ABMA STD-4
Tolerance Definitions and Gaging Practices for Ball and Roller Bearings
ANSI/ABMA STD-9
Load Ratings and Fatigue Life For Ball Bearings
ANSI/ABMA STD-13
Rolling Bearing Vibration and Noise (Methods of Measuring)
ANSI/ABMA STD-20
Radial Bearings of Ball, Cylindrical Roller and Spherical Roller Types - Metric
Design
ANSI/ABMA/ISO 3290
Rolling Bearings - Balls - Dimensions and Tolerances (DoD adopted)
(Copies of these documents are available from the American Bearing Manufacturers Association, Inc., 2025
M. St., NW, Suite 800, Washington, D.C. 20036 or online at www.abma.org.)
AMERICAN WELDING SOCIETY (AWS)
AWS B2.1
Welding Procedure and Performance Qualification, Standard For (DoD adopted)
AWS B2.2
Brazing Procedure and Performance Qualification, Standard For (DoD adopted)
(Copies of these documents are available from the American Welding Society, 550 NW LeJeune Road, Miami,
FL 33216 or online at www.aws.org.)
ASTM INTERNATIONAL
ASTM B26
Standard Specification for Aluminum-Alloy Sand Castings (DoD adopted)
ASTM F1166
Standard Practice for Human Engineering Design for Marine Systems, Equipment and
Facilities (DoD adopted)
(Copies of these documents are available from ASTM International, 100 Barr Harbor Drive, West
Conshohocken, PA 19428-2959 or online at www.astm.org.)
INSTITUTE OF ELECTRICAL AND ELECTRONICS ENGINEERS (IEEE)
IEEE STD 45
Recommended Practice for Electric Installations on Shipboard (DoD adopted)
(Copies of this document are available from the Institute of Electrical and Electronics Engineers, 445 Hoes
Lane, P.O. Box 1331, Piscataway, NJ 08855-1331 or online at www.ieee.org.)
NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA)
NEMA MG 1
Motors and Generators (DoD adopted)
(Copies of this document are available from the National Electrical Manufacturers Association, 1300 N. 17th St.,
Suite 1847, Rosslyn, VA 22209 or online at www.nema.org.)
2.4 Order of precedence. In the event of a conflict between the text of this document and the references cited
herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws
and regulations unless a specific exemption has been obtained.
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business