MIL-PRF-24751A(SH)
ANSI/ABMA STD-20
-
Radial Bearings of Ball, Cylindrical Roller and Spherical Roller
Types Metric Design
ANSI/ABMA/ISO 3290
-
Rolling Bearings Balls Dimensions and Tolerances (DoD adopted)
(Copies of these documents are available from the American Bearing Manufacturers Association, Inc., 1101
Connecticut Avenue, NW, Suite 700, Washington, DC 20036 or online at www.abma-dc.org.)
AMERICAN WELDING SOCIETY (AWS)
AWS B2.1
-
Welding Procedure and Performance Qualification, Standard For
AWS B2.2
-
Brazing Procedure and Performance Qualification, Standard For
(Copies of these documents are available from the American Welding Society, 550 NW LeJeune Road, Miami,
FL 33216 or online at www.aws.org.)
ASTM INTERNATIONAL
ASTM B26
-
Standard Specification for Aluminum Alloy Sand Castings (DoD adopted)
ASTM E119
-
Standard Test Methods for Fire Tests of Building Construction and Materials
(DoD adopted)
ASTM E662
-
Standard Test method for Specific Optical Density of Smoke Generated by
Solid Materials
ASTM E800
-
Standard Guide for Measurement of Gases Present or Generated During Fires
ASTM F1166
-
Standard Practice for Human Engineering Design for Marine Systems,
Equipment and Facilities (DoD adopted)
(Copies of these documents are available from ASTM International, 100 Barr Harbor Drive, West
Conshohocken, PA 19428-2959 or online at www.astm.org.)
INSTITUTE OF ELECTRICAL AND ELECTRONICS ENGINEERS (IEEE)
IEEE STD 45
-
IEEE Recommended Practice for Electric Installations on Shipboard (DoD
adopted)
IEEE STD 429
-
Standard Test Procedure for the Evaluation of Sealed Insulation Systems for
AC Electric Machinery Employing Form Wound Stator Coils
(Copies of these documents are available from the Institute of Electrical and Electronics Engineers, 445 Hoes
Lane, P.O. Box 1331, Piscataway, NJ 08855-1331 or online at www.ieee.org.)
NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA)
NEMA MG 1
-
Motors and Generators (DoD adopted)
(Copies of this document is available from the National Electrical Manufacturers Association, 1300 North 17th
Street, Suite 1847, Rosslyn, VA 22209 or online at www.nema.org.)
2.4 Order of precedence. In the event of a conflict between the text of this document and the references cited
herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws
and regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 First article. When specified (see 6.2), a sample shall be subjected to first article inspection in accordance
with 4.2.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business